Project Description
Nickel alloys scrap
Nickel alloys are used for a wide variety of applications, the majority of which involve corrosion resistance and/or heat resistance. Some of these include:
- Aircraft gas turbines
- Steam turbine power plants
- Medical applications
- Nuclear power systems
- Chemical and petrochemical industries
Some of the alloys we trade are:
Inconel 713 / Inconel 625 / Inconel 738 / Inconel 718 / GTD111 / GTD222 / Rene 80 / Rene 88 / Rene 41 / Rene 77 / Rene 125 C1023 / Hastelloy C263 / Hastelloy X / Hastelloy C276 / Hastelloy C22 / Hastelloy C4 / PWA 1480 / PWA 1484 / CMSX 2 / CMSX 3 / CMSX 4 / CMSX 6
We have the possibility to offer Vacuum and airmelt grades.
Typical Nickel Alloy specifications we trade
| Material type | Ni | Cr | Co | Mo | W | Fe | Al | Ti | Cu | Nb | Other |
| Hastelloy A | 57.00 | 1.0* | 21.00 | 19.00 | |||||||
| Hastelloy B | 62.00 | 1.0* | 2.5* | 28.00 | 5.50 | 0.4% V | |||||
| Hastelloy D | 85.00 | 1.0* | 1.0* | 4.0* | 9% Si | ||||||
| Hastelloy F | 45.00 | 22.00 | 2.5* | 6.00 | 1.0* | 18.00 | 2.00 | ||||
| Hastelloy G | 44.00 | 22.00 | 6.50 | 1.0* | 20.00 | 2.00 | 2.00 | ||||
| Hastelloy N | 72.00 | 7.00 | 0.20 | 16.50 | 0.50 | 5.0* | 0.25 | 0.25 | 0.01% B | ||
| Hastelloy R | 66.00 | 15.50 | 1.5* | 5.00 | 7.0* | 2.20 | 2.50 | ||||
| Hastelloy S | 68.00 | 15.50 | 14.50 | 1.00 | 0.5%Mn 0.4% Si | ||||||
| Hastelloy W | 63.00 | 5.00 | 2.5* | 24.50 | 5.50 | 0.6% V | |||||
| Hastelloy X | 47.00 | 22.00 | 1.50 | 9.00 | 0.60 | 18.50 | |||||
| Hastelloy C276 | 56.00 | 16.00 | 2.5* | 17.00 | 4.00 | 5.50 | 0.4* | 0.35% V | |||
| Hastelloy C22 | 54.00 | 21.00 | 2.5* | 14.00 | 3.00 | 5.0* | 0.4* | 0.35% v | |||
| Hastelloy C4 | 54.00 | 16.00 | 1.25* | 16.00 | 2.0* | 0.4* | 0.5* | ||||
| Inconel 600 | 75.50 | 15.50 | 7.00 | ||||||||
| Inconel 601 | 60.50 | 23.00 | 14.10 | 1.35 | |||||||
| Inconel 702 | 79.00 | 15.60 | 0.40 | 3.40 | 0.70 | ||||||
| Inconel 713C | 72.00 | 13.40 | 4.50 | 1.5* | 6.20 | 1.0* | 2.30 | ||||
| Inconel 718 | 53.00 | 18.50 | 3.00 | 18.00 | 0.80 | 5.00 | |||||
| Inconel 800 | 32.00 | 20.00 | 47.00 | ||||||||
| Inconel 825 | 40.00 | 21.00 | 3.00 | 32.00 | 1.00 | 2.00 | |||||
| Inconel 901 | 42.00 | 12.50 | 1.0* | 5.70 | 35.00 | 0.35* | 2.90 | ||||
| Inconel 792 | 61.00 | 12.50 | 9.00 | 2.00 | 3.90 | 3.20 | 4.20 | 4.2% Ta/ 1% Hf | |||
| Inconel 738 | 61.00 | 16.00 | 8.50 | 1.75 | 2.60 | 0.50 | 3.40 | 3.40 | 0.90 | 1.75% Ta | |
| Inconel 939 | 48.00 | 22.40 | 19.00 | 2.00 | 1.90 | 3.70 | 1.00 | 1.4% Ta | |||
| GMR 235 | 63.00 | 15.50 | 3.20 | 10.00 | 3.70 | 2.00 | 0.06% B | ||||
| Nimonic 75 | 77.00 | 20.00 | 5.0* | 0.15 | 0.40 | ||||||
| Nimonic 80 | 74.00 | 20.00 | 2.0* | 1.5* | 1.30 | 2.20 | |||||
| Nimonic 81 | 65.00 | 30.00 | 1.0* | 1.00 | 1.75 | ||||||
| Nimonic 90 | 57.00 | 20.00 | 16.00 | 5.0* | 1.50 | 2.50 | |||||
| Nimonic 91 | 47.50 | 28.50 | 20.00 | 1.20 | 2.30 | ||||||
| Nimonic 105 | 53.00 | 15.00 | 20.00 | 5.00 | 1.0* | 4.70 | 1.20 | ||||
| Nimonic 115 | 57.00 | 15.00 | 15.00 | 3.50 | 1.0* | 5.00 | 4.00 | ||||
| Nimonic C263 | 50.00 | 20.00 | 20.00 | 5.90 | 0.75* | 0.50 | 2.20 | ||||
| Nimonic C1023 | 56.00 | 15.50 | 9.50 | 8.00 | 0.25 | 4.30 | 3.60 | ||||
| GTD 111 | 59.00 | 14.00 | 9.50 | 1.50 | 3.80 | 0.5* | 3.00 | 4.90 | 2.8% Ta/ 0.02*% B | ||
| GTD 222 | 50.00 | 22.50 | 19.00 | 2.00 | 0.25* | 1.20 | 2.30 | 0.80 | 1.0% Ta | ||
| Rene 41 | 52.00 | 19.00 | 11.00 | 10.00 | 5.0* | 1.60 | 3.20 | ||||
| Rene 77 (Udimet 700) | 52.00 | 15.00 | 15.00 | 4.00 | 0.5* | 4.20 | 3.50 | 0.02*% B | |||
| Rene 80 | 60.00 | 14.00 | 9.50 | 4.00 | 4.00 | 3.00 | 5.00 | ||||
| Rene 88 | 55.00 | 16.00 | 13.00 | 4.00 | 4.00 | 0.25 | 2.10 | 3.75 | 0.70 | 0.02% B | |
| Rene 125 | 59.00 | 9.00 | 10.00 | 2.00 | 4.80 | 2.60 | 3.8% Ta/ 1.6% Hf / 7% W | ||||
| Waspalloy | 56.00 | 19.00 | 14.00 | 4.20 | 1.5* | 1.40 | 3.00 | 0.1% Zr | |||
| Udimet 500 | 53.00 | 17.50 | 16.50 | 4.00 | 4.00 | 2.90 | 3.90 | 0.01 B | |||
| Udimet 520 | 56.00 | 19.00 | 12.00 | 6.00 | 1.00 | 1.00 | 2.00 | 3.00 | |||
| Udimet 600 | 52.00 | 17.50 | 16.50 | 4.00 | 4.0* | 4.20 | 2.90 | 0.04*% B | |||
| Mar M 246 | 600.00 | 9.00 | 10.00 | 2.50 | 10.00 | 0.15 | 5.50 | 1.50 | 1.5% Ta | ||
| PWA 663 (B1900) | 64.00 | 8.00 | 10.00 | 6.00 | 6.00 | 1.00 | 1% Zr/ 4% Ta | ||||
| Mar M 200 | 60.00 | 9.00 | 10.00 | 12.00 | 5.00 | 2.00 | 1.00 | 0.12% B | |||
| Mar M 002 | 59.00 | 10.00 | 10.00 | 10.00 | 1.0* | 5.00 | 1.50 | 2.5% Ta / 1.5% Hf | |||
| Mar M 247 | 58.00 | 8.50 | 10.00 | 0.60 | 10.00 | 0.5* | 5.50 | 1.00 | 3% Ta | ||
| Alloy 230 | 57.5 | 22.00 | 2.00 | 14.00 | 3 | 0.30 | 0.1% C/0.5% Mn/0.4% Si | ||||
| Kovar | 29 | 17 | 54 | ||||||||
| N155 (Multimet) | 20 | 21 | 20 | 3 | 2.5 | 30.35 | 0.5% C/ Ta 1%/ Si 0.5% |
| Ni | Cr | Co | Mo | W | Nb | Ta | Ti | Re | Hf | Other | |
| PWA 1480 | Bal | 10 | 5 | 4 | 12 | 1.5 | B-0.003%/ Al 5% | ||||
| PWA 1484 | Bal | 5 | 10 | 1.9 | 5.9 | 8.7 | 3 | 0.1 | Al 5.6% | ||
| PWA 1487 | Bal | 5 | 10 | 1.9 | 5.9 | 8.4 | 3 | 0.25 | Al 5.65% | ||
| Rene N4 | Bal | 10 | 8 | 2 | 6 | 0.5 | 5 | 3.5 | 0.2 | Al 4.2% | |
| Rene N5 | Bal | 7 | 8 | 2 | 5 | 6 | 3 | 0.2 | Al 6.2% | ||
| Rene N6 | Bal | 4 | 12 | 1 | 6 | 7 | 5 | 0.2 | Al 5.8% | ||
| CMSX-2 | Bal | 8 | 5 | 0.6 | 8 | 6 | 1 | Al 5.6% | |||
| CMSX-3 | Bal | 8 | 5 | 0.6 | 8 | 6 | 1 | 0.1 | Al 5.6% | ||
| CMSX-4 | Bal | 6.5 | 9 | 0.6 | 6 | 6.5 | 1 | 3 | 0.1 | Al 5.6% | |
| CMSX-6 | Bal | 10 | 5 | 3 | 2 | 4.7 | 0.1 | Al 4.8% | |||
| CMSX-10 | Bal | 2 | 3 | 0.4 | 5 | 0.1 | 8 | 0.2 | 6 | 0.03 | Al 5.7% |
| CMSX 486 | Bal | 5 | 9 | 0.7 | 9 | 4.5 | 0.7 | 3 | 1 | C 0.07%/ Al 5.7%/ B 0.015%/ Zr 0.005% |
